The cables used in cathodic protection systems are single-core type insulated coating. The cable conductor shall be annealed of copper thread and the strings shall be of circular cross-section. Cable coating usually consists of two insulation and sheath segments. Primary insulation of the cable shall be made of materials physically and chemically resistant to the environmental impact of the service in a buried or submerged state.
This should be achieved by applying continuous coatings with sufficient dielectric properties and high scratch resistance, stress cracking and crack propagation. The cable sheath shall also be continuous, uniform thickness and meet the minimum required thickness. The cable sheath shall be such that it can be removed without damaging the insulation. Cable coating (insulation and sheath) shall be completely free from any cracks, gaps, scratches or other discontinuities.
Cathodic Protection Cable Conductor Dimensions and Electrical Resistance in Accordance with IPS-M-TP-750
| Cross-sectional area (mm²) | Minimum number of wires in conductor | Maximum conductor electrical resistance at 20 °C (Ω/km) | Approximate conductor current-carrying capacity at 25 °C (A) |
| 4 6 10 16 25 35 50 70 95 120 | 7 7 7 7 7 19 19 19 19 19 | 4.52 3.02 1.79 1.13 0.712 0.514 0.379 0.262 0.193 0.153 | 42 54 73 98 129 158 196 245 292 344 |
Common cathodic protection cables are classified by insulation and sheath type as follows:
High Molecular Weight Polyethylene Covered Cable HMWPE/PVDF or Kynar
In this cable type, the insulation and sheath are produced from polyethylene thermoplastic. Commonly known by the trade name Kynar, it is mainly used in highly corrosive, chlorine-containing environments, including chlorine-containing soils, saline water, seawater and acidic environments with a low pH.
Polyvinyl Chloride Covered Cable XLPE/PVC
In this cable type, the insulation and sheath are made from polyvinyl chloride or a vinyl chloride–vinyl acetate compound. It is used in common cathodic protection applications, including structures buried in soil and chlorine-free fresh water.
Borna Electronic can supply cathodic protection cables to meet customer requirements or project needs.
