Coke Backfill for Cathodic Protection

Impressed current anodes are usually installed in horizontal or vertical groundbeds where there are no environmental constraints, or in deep-well groundbeds in dry desert conditions. In each case, low-resistance carbonaceous backfill surrounds the anodes. By reducing anode-to-earth resistance, it improves anode life and performance.

IPS-M-TP-750 identifies three carbon-rich backfill materials: metallurgical coke with 80% carbon, petroleum coke with 90% carbon and special petroleum coke with 95% carbon. Type 1 metallurgical coke must have low electrical resistivity and low ash content. Type 2 petroleum coke is calcined to remove petroleum products other than carbon and must be granular. Type 3 special petroleum coke undergoes special calcination for the same purpose. The product must contain 0.1% wetting agent to improve granular particle formation and water absorption by the backfill. The resulting granules must be rounded and resistant to crushing.

Comparison of Chemical Properties and Density of Three Cathodic Protection Coke Types

Chemical properties (%wt)Type 1 Metallurgical cokeType 2 Petroleum cokeType 3 Special petroleum coke
ValueDensity (kg/m³)ValueDensity (kg/m³)ValueDensity (kg/m³)
Carbon minimum80800 – 650901000 – 700951200 – 1050
Moisture maximum551
Ash maximum1553
Sulphur maximum151
Volatile matter maximum551
 

Particle Size Comparison of Three Cathodic Protection Coke Types

Particle sizeType 1 Metallurgical cokeType 2 Petroleum cokeType 3 Special petroleum coke
100% smaller than 10 mm
90% larger than 1 mm
100% smaller than 3 mm
90% larger than 0.5 mm
100% smaller than 1 mm
80% larger than 0.6 mm
90% larger than 0.4 mm
99% larger than 0.15 m

IPS-M-TP-750 requires the electrical resistivity of Types 1 and 2 to be below 100 Ω·cm, and that of Type 3 not to exceed 0.1 Ω·cm. Under the same conditions, Type 3 offers better quality and performance because of its negligible electrical resistivity.

Coke is packed in double-layer 25 kg or one-tonne bags to protect it from environmental exposure. Maintaining its original moisture content during packing and storage until use on site is particularly important.

Borna Electronic can supply cathodic protection coke to meet customer requirements or project needs.